How to load a car hauler safely

Our 18′ car hauler carries about 4,915 lb. Most cars and small SUVs fit easily; many full-size pickups don’t. Here’s how to check, load and strap down.

Car hauler · October 29, 2026 · 4 min read

Diagram showing a car placed with about 60 percent of its weight ahead of the trailer axles and strapped at four corners

1. Check the vehicle’s weight

Find the vehicle’s curb weight in the owner’s manual or on the manufacturer’s spec sheet. It must be under the hauler’s approximate payload of 4,915 lb (GVWR 7,000 lb, including the trailer).

Vehicle typeTypical curb weightFits?
Compact or midsize car2,800–3,600 lbUsually
Small or midsize SUV3,300–4,500 lbUsually—check
Full-size SUV or pickup4,500–6,000+ lbOften too heavy
Riding mower, ATV or UTV400–2,000 lbYes

Then make sure your tow vehicle can pull the trailer plus the load—see the towing guide.

2. Set up on level ground

  • Keep the trailer hitched to your tow vehicle, in park with the parking brake on.
  • Slide out the ramps and line them up with the vehicle’s tires.
  • Low cars can scrape on the beavertail—go slowly and check clearance.

3. Drive on and position the load

  • Drive up slowly and steadily with a spotter guiding you. Never stand in front of or beside a moving vehicle on the ramps.
  • Place the vehicle so roughly 60% of its weight is ahead of the trailer axles. For most cars, that means engine-forward.
  • Too far back makes the trailer sway; too far forward overloads your hitch. Aim for a tongue weight of about 10–15% of the loaded trailer weight.

4. Strap it down at four points

  • Use rated straps (axle straps or wheel nets) at all four corners, attached to the trailer’s tie-down points.
  • Strap to the frame, axles or wheels—never to suspension arms, bumpers or steering parts.
  • Put the vehicle in park (or in gear) with its parking brake on.
  • Re-check the straps after the first few miles; they settle.

5. Before you drive

Stow the ramps, then do the walk-around: coupler latched, chains crossed, lights and brakes working, brake controller set for the load.

Tell us in your request whether you need straps or a winch—we confirm included equipment before pickup.

Moving a vehicle or equipment?

Tell us what it is, roughly what it weighs and what you’re towing with. We’ll confirm the hauler is a fit.

Call Text Request